Printing Conductive Ink HSL-T47XXX

////Printing Conductive Ink HSL-T47XXX

Printing Conductive Ink HSL-T47XXX

It is a two-component ink suitable for silicone key products, suitable for the conductive requirements.

Simple operation

Long storage time

Good appearance after printing

Strong adhesion

Good stability and super electric conductivity



Items Value
Printing Viscosity(rotational viscometer mPa,25℃)mPa 10000-40000
Force drying(180-220℃),Min 20-60

Testing paremeter

Testing item Testing condition and method Result
Adhesion The case method,Rubber 3M610# 3times
Theory solid content 150℃/1.5h 45%-55%
Resistance after potting By multimeter and dedicated board, 200g positive pressure, thickness about 10-15 <100Ω(S=4.0mm2)
Conductivity change Conductive dry ink, 500g positive pressure, scratched by fingernail for 3 to 5 times <200Ω
Hot and humid 80℃/98%RH
No abnormality in 48h

1. Vulcanize the material twice before use (150℃/1-2 hours), and the surface needs to be clean;
2. Take out the sealed ink, add 1.0% catalyst CAT-SPL-11 after opening the lid, and mix it evenly. If the viscosity is too high, add odorless kerosene to adjust to the proper viscosity for screen printing, pad printing or dot printing. ;

Silicone rubber buttons/plastic parts for electronic products such as fax machines, photocopiers, and electric remote controls

1. After opening the can, the product should be fully stirred evenly; the dot printing must maintain a good construction environment. It is recommended that the operating workshop adopt dust-free treatment, the temperature should be controlled below 35℃, and the humidity should be controlled at 55-75%; the humidity is too low or too high. Affect the uniformity of the appearance of the product table after dot printing;
2. It is better for the printed products to undergo a secondary vulcanization greater than 150°C/1-2 hours before use, otherwise it will cause poor local vulcanization of the paint film; please refrigerate the ink, and the unused ink should be sealed and refrigerated.

3. Storage conditions: sealed and stored in a cool, dry and ventilated place (storage temperature -5~37℃, humidity 55~85%), waterproof, leakproof, sunscreen, high temperature, away from fire


There are no reviews yet.

Be the first to review “Printing Conductive Ink HSL-T47XXX”

Your email address will not be published. Required fields are marked *

Get a Catalog & Best Price

Get a Catalog & Best Price