Silicone Synthetic Leather Surface Adhesive BQ-6393AB

1. BQ-6393AB adhesive coating should be mixed in a ratio of A:B = 1:10. Mixing equipment must be clean and free of contamination, preferably equipped with a cooling system. 

2. Apply BQ-6393AB onto release paper and cure at 100-200°C for 1-10 minutes. Typical curing conditions are 120℃/5 minutes for a coating thickness of approximately 100 microns. Adjust curing temperature and time according to the actual thickness. It should be noted that this top coat can be roll-coated to a film thickness ranging from 10 to 100 microns (1-10 mils). For thicker coatings, multiple layers are required to avoid bubble formation. 

3. BQ-6393AB has good compatibility with color pastes. If color paste is required, it must be tested before addition.

Packaging：

This product is available in various packaging sizes. Please contact sales personnel for details.

Storage & Shelf life:

1. Store sealed in a cool, dry place. Recommended storage temperature is 5-30℃. 

2. Unused adhesive should be sealed promptly. 

3. Shelf life is 12 months.

1. For low viscosity requirements, aliphatic hydrocarbon solvents or other environmentally friendly solvents can be used for dilution.

2. During use, avoid contact with catalyst poisons such as ammonia, phosphorus, sulfur, tin, lead, acrylates, polyurethane, and peroxides. 

3. Avoid contact with skin, eyes, and clothing. If contact with eyes occurs, rinse with water for 15 minutes. If adhered to skin, wipe clean immediately with a dry cloth and wash with soap and water. 

4. This document does not contain all information required for safe use. Before handling accidents, please read the product and Safety Data Sheet for information on safe use, physical and health hazards.