Potting Silicone Conductive Ink For Key HSL-T37XXX

Testing parameters

The ink is mainly applied to fax machines, copy machines, cluster machines, remote controllers, ect electronics' silicone keypads.

1. Stir well after the container is opened.

2. Keep a good environment before pot printing. The non-dust treated workplace is suggested to avoid the dust effect on the product's surface. Please strictly keep the temperature below 35℃ and humidity between 55 to 75%, or the effect of the potted products will be affected.

3. Post vulcanization for spot printing silicone rubber objects is needed at 150℃ for at least 1 to 2 hours to avoid poor vulcanization of printed ink.

4. Cold store the ink and the remaining ink should be sealed and cold stored.