The silicone gel is a RTV two-component pressure-sensitive adhesive. It has different properties from other glues (such as acrylic glues, natural glues, etc.).The differences include broad range of using temperature, r, conformity, bonging surface with low bonding energy and bonding properties
Silicon glue for Strapless Bra
Description
Product features
Fast curing speed
Strong adhesion
Good flexibility
Non-toxic and tasteless
Passed RoHS certification
Application field
Chest pads, clothing shoulder pads, patches, non-slip pads, electronic sealing materials, etc.
Suitable for multiple surfaces of different substrates, especially working well for bonding on human being’s skin (example of typical use: silicone glue bonded brassier)
The performance parameters
| Properties | Silicon adhesive |
| Appearance | Component A: transparent viscous liquid |
| Component B: light yellow transparent liquid | |
| Viscosity（mpa.s） | A：14000-18000 |
| Operation time | 9-12 min |
| Time for sticking film | ≤6 h |
Note: test environmental temperature 25℃, humidity 60%
Use direction
| Environmental Humidity | Mix Ratio | Notes |
| Below 30% | A/B=30/0.7 | 1. Well mixed silicone should be used in 10min;
2. The humidity in working place has effect on adhesiveness of the silicone; please adjust the mix ratio according to practical humidity to achieve best adhesiveness effect. 3. The adhesiveness will decrease when increase quantity of component B; On the contrary, the adhesive will increase |
| 30%-50% | A/B=30/0.8 | |
| 50%-80% | A/B=30/0.9 | |
| Above 80% | A/B=30/1 |
- Spray the silicon adhesive on the item uniformly until alike surface color, secondly spray after keeping the sprayed item at room temperature for 1h, repeat spray according to above mentioned method until get the your required thickness
- Put the film on the glue after 6 hours
Product Certificate
Fast curing speed
Strong adhesion
Good flexibility
Non-toxic and tasteless
Passed RoHS certification
Chest pads, clothing shoulder pads, patches, non-slip pads, electronic sealing materials, etc.
Suitable for multiple surfaces of different substrates, especially working well for bonding on human being’s skin (example of typical use: silicone glue bonded brassier)
| Properties | Silicon adhesive |
| Appearance | Component A: transparent viscous liquid |
| Component B: light yellow transparent liquid | |
| Viscosity（mpa.s） | A：14000-18000 |
| Operation time | 9-12 min |
| Time for sticking film | ≤6 h |
- Note: test environmental temperature 25℃, humidity 60%
| Environmental Humidity | Mix Ratio | Notes |
| Below 30% | A/B=30/0.7 | 1. Well mixed silicone should be used in 10min;
2. The humidity in working place has effect on adhesiveness of the silicone; please adjust the mix ratio according to practical humidity to achieve best adhesiveness effect. 3. The adhesiveness will decrease when increase quantity of component B; On the contrary, the adhesive will increase |
| 30%-50% | A/B=30/0.8 | |
| 50%-80% | A/B=30/0.9 | |
| Above 80% | A/B=30/1 |
- Spray the silicon adhesive on the item uniformly until alike surface color, secondly spray after keeping the sprayed item at room temperature for 1h, repeat spray according to above mentioned method until get the your required thickness
- Put the film on the glue after 6 hours
Reviews
There are no reviews yet.